Undercounter Dishwasher – Washmatic

 

UNDERCOUNTER – Glasswasher 200

Product Description

Deep drawn wash tank for easy cleaning and hygiene

The wash tank is made of AISI 304 grade deep drawn (die pressed) stainless steel, which eliminates any welded joints and problems arising from that. Deep drawn wash tank with round corners facilitates easy cleaning. Easily removable basket support, wash and rinse arms, filters etc. For easy cleaning. Unique air break prevents back flow contaminations to the piping network. 

High quality components

Indigenously designed and developed parts for perfect results after each wash. Care has been taken to ensure that the components perform under indian working conditions

Auto cycle

The machine cycle automatically starts on the closing of door when set into auto mode. If the machine is not up to temperature, it will auto cycle as soon as correct temperature has been reached. No buttons to push. Leaves operator time to perform other tasks

High temperature wash and rinse

Washing is done at a temperature of 60°c with detergent water; this ensures 100% cleaning of oil residues. Final rinse using fresh water removes any detergent residues on the plate. It is performed at 82°c + to kill all germs, ensuring haccp compliance. Specially designed spray nozzles ensures minimum evaporation of sprayed water and maximum contact with wares being washed.

Multiple wash programs

Option of 5 wash programs for saving time, water and chemicals. The operator can select the best suitable wash programs to suit washing needs along with continuous cycle recommended for soaking of heavily soiled dishes.

Filtration system

The filter filters out smaller particles before they enter the wash pump, giving superior wash results and reducing service requirements.

Solid state control

This technology gives improved reliability and machine flexibility, and will keep the operator informed at all stages of machine operation. Accurate chemical dosing and temperature control will ensure a first class result each time.

Strong washing power

Powerful wash pump and injection moulded scientifically set intelligent collision technology ensures maximum washing power. Unique cross blade action from top and bottom ensures that no area remains uncovered.

Safety

12 volt dc control circuit ensures operator safety from electric shocks. Temperature interlock ensures machine will not operate until the correct work temperature has been reached, giving superior results and a sanitized end product.

Dry run protection

Heater / pump will not operate if water levels are inadequate preventing burnouts

Washing and rinsing temperature indicators

Separate digital temperature gauges showing live temperatures guarantee perfect results

All stainless steel construction 

AISI 304 ss (food grade) construction for long life.

Door safety sensor

Automatically stops the cycle should the door be opened during the cycle. This avoids accidental spillage and gives safety to the operator

Increased profits

Designed to give you huge savings in labour, detergents and water. The machine saves upto 70% water and detergents and 90% labour. The machine minimizes chipping and scratching of plates, increasing the life of expensive crockery. Space requirements are much less when compared to normal 3 sink washing system.

Zero back clearance

The machine requires no space at the rear side, this gives flexibility of installation and space savings. All service points are at the bottom side of rear panel, simple to install and maintain.

Safety thermostat

Additional safety thermostat set at 90 degree c prevents any accidents due to temperature probe failure, ensuring safety.

Comprehensive AMC and spare parts stock

Once the standard warranty is over comprehensive AMC’s are available at nominal rates, avoiding high ownership costs and ensuring trouble free operations for years to come. All spares parts are in stock at regional offices.

 

 

 

 300DIG

 300DIG1 

 

 

 300DIG2  

 

 

 

 

 

 

  

300DIG3

 300DIG4  

 

 

  

 

300DIG5

washmatic glass washer 

Dimensions - 465 x 570 x 730 cm

 

Capacity(Racks/ Hr.) 60
Capacity Plates /Hr 1080
Wash programs 2
Temprature Display N/A
Controls ELECTRONIC
Display Type ANALOG/LED
Electrical Load (KW) 3.5
Power Supply 230
Tank Capacity (Litres) 7
Temperature Interlock YES
Phase Monitor NO
Length of Machine 465
Prewash Zone N/A
Wash Zone YES
Rinse Zone YES
Dry Zone N/A
Prewash Power N/A
Wash Power 0.28
Net Weight N/A
Rack Dimensions (mm) 400 X 400
Clear Entry Height (mm) 320
Wash Temperature 62
Rinse Temperature 82
Rinse Water (Litres/Rack) 2

 

 

UNDERCOUNTER – 300ECO

Product Description

Deep drawn wash tank for easy cleaning and hygiene

The wash tank is made of AISI 304 grade deep drawn (die pressed) stainless steel, which eliminates any welded joints and problems arising from that. Deep drawn wash tank with round corners facilitates easy cleaning. Easily removable basket support, wash and rinse arms, filters etc. For easy cleaning. Unique air break prevents back flow contaminations to the piping network. 

High quality components

Indigenously designed and developed parts for perfect results after each wash. Care has been taken to ensure that the components perform under indian working conditions

Auto cycle

The machine cycle automatically starts on the closing of door when set into auto mode. If the machine is not up to temperature, it will auto cycle as soon as correct temperature has been reached. No buttons to push. Leaves operator time to perform other tasks

High temperature wash and rinse

Washing is done at a temperature of 60°c with detergent water; this ensures 100% cleaning of oil residues. Final rinse using fresh water removes any detergent residues on the plate. It is performed at 82°c + to kill all germs, ensuring haccp compliance. Specially designed spray nozzles ensures minimum evaporation of sprayed water and maximum contact with wares being washed.

Multiple wash programs

Option of 5 wash programs for saving time, water and chemicals. The operator can select the best suitable wash programs to suit washing needs along with continuous cycle recommended for soaking of heavily soiled dishes.

Filtration system

The filter filters out smaller particles before they enter the wash pump, giving superior wash results and reducing service requirements.

Solid state control

This technology gives improved reliability and machine flexibility, and will keep the operator informed at all stages of machine operation. Accurate chemical dosing and temperature control will ensure a first class result each time.

Strong washing power

Powerful wash pump and injection moulded scientifically set intelligent collision technology ensures maximum washing power. Unique cross blade action from top and bottom ensures that no area remains uncovered.

Safety

12 volt dc control circuit ensures operator safety from electric shocks. Temperature interlock ensures machine will not operate until the correct work temperature has been reached, giving superior results and a sanitized end product.

Dry run protection

Heater / pump will not operate if water levels are inadequate preventing burnouts

Washing and rinsing temperature indicators

Separate digital temperature gauges showing live temperatures guarantee perfect results

All stainless steel construction 

AISI 304 ss (food grade) construction for long life.

Door safety sensor

Automatically stops the cycle should the door be opened during the cycle. This avoids accidental spillage and gives safety to the operator

Increased profits

Designed to give you huge savings in labour, detergents and water. The machine saves upto 70% water and detergents and 90% labour. The machine minimizes chipping and scratching of plates, increasing the life of expensive crockery. Space requirements are much less when compared to normal 3 sink washing system.

Zero back clearance

The machine requires no space at the rear side, this gives flexibility of installation and space savings. All service points are at the bottom side of rear panel, simple to install and maintain.

Safety thermostat

Additional safety thermostat set at 90 degree c prevents any accidents due to temperature probe failure, ensuring safety.

Comprehensive AMC and spare parts stock

Once the standard warranty is over comprehensive AMC’s are available at nominal rates, avoiding high ownership costs and ensuring trouble free operations for years to come. All spares parts are in stock at regional offices.

 

 

 

 300DIG

 300DIG1 

 

 

 300DIG2  

 

 

 

 

 

 

  

300DIG3

 300DIG4  

 

 

  

 

300DIG5

UNDERCOUNTER – 300DIG

Dimensions - 640 x 750 x 850 cm

 

Capacity(Racks/ Hr.) 60
Capacity Plates /Hr 1080
Wash programs 2
Temprature Display N/A
Controls ELECTRONIC
Display Type LED
Electrical Load (KW) 4.75
Power Supply 230
Tank Capacity (Litres) 25
Temperature Interlock NO
Phase Monitor NO
Length of Machine 620
Prewash Zone N/A
Wash Zone YES
Rinse Zone YES
Dry Zone N/A
Prewash Power N/A
Wash Power 0.75
Net Weight 80
Rack Dimensions (mm) 500 X 500
Clear Entry Height (mm) 320
Wash Temperature 62
Rinse Temperature 82
Rinse Water (Litres/Rack) 2.3

 

 

UNDERCOUNTER – 300ELE

Product Description

Washing and rinsing temperature indicators 

Separate analogue temperature gauges showing live temperatures guarantee perfect results

Deep drawn wash tank for easy cleaning and hygiene

The wash tank is made of AISI 304 grade deep drawn (die pressed) stainless steel, which eliminates any welded joints and problems arising from that. Deep drawn wash tank with round corners facilitates easy cleaning. Easily removable basket support, wash and rinse arms, filters etc. For easy cleaning. Unique air break prevents back flow contaminations to the piping network. 

High quality components

Indigenously designed and developed parts for perfect results after each wash. Care has been taken to ensure that the components perform under indian working conditions

Auto cycle

The machine cycle automatically starts on the closing of door when set into auto mode. If the machine is not up to temperature, it will auto cycle as soon as correct temperature has been reached. No buttons to push. Leaves operator time to perform other tasks

High temperature wash and rinse

Washing is done at a temperature of 60°c with detergent water; this ensures 100% cleaning of oil residues. Final rinse using fresh water removes any detergent residues on the plate. It is performed at 82°c + to kill all germs, ensuring haccp compliance. Specially designed spray nozzles ensures minimum evaporation of sprayed water and maximum contact with wares being washed.

Multiple wash programs

Option of 5 wash programs for saving time, water and chemicals. The operator can select the best suitable wash programs to suit washing needs along with continuous cycle recommended for soaking of heavily soiled dishes.

Filtration system

The filter filters out smaller particles before they enter the wash pump, giving superior wash results and reducing service requirements.

Solid state control

This technology gives improved reliability and machine flexibility, and will keep the operator informed at all stages of machine operation. Accurate chemical dosing and temperature control will ensure a first class result each time.

Strong washing power

Powerful wash pump and injection moulded scientifically set intelligent collision technology ensures maximum washing power. Unique cross blade action from top and bottom ensures that no area remains uncovered.

Safety

12 volt dc control circuit ensures operator safety from electric shocks. Temperature interlock ensures machine will not operate until the correct work temperature has been reached, giving superior results and a sanitized end product.

Dry run protection

Heater / pump will not operate if water levels are inadequate preventing burnouts

Washing and rinsing temperature indicators

Separate digital temperature gauges showing live temperatures guarantee perfect results

All stainless steel construction 

AISI 304 ss (food grade) construction for long life.

Door safety sensor

Automatically stops the cycle should the door be opened during the cycle. This avoids accidental spillage and gives safety to the operator

Increased profits

Designed to give you huge savings in labour, detergents and water. The machine saves upto 70% water and detergents and 90% labour. The machine minimizes chipping and scratching of plates, increasing the life of expensive crockery. Space requirements are much less when compared to normal 3 sink washing system.

Zero back clearance

The machine requires no space at the rear side, this gives flexibility of installation and space savings. All service points are at the bottom side of rear panel, simple to install and maintain.

Safety thermostat

Additional safety thermostat set at 90 degree c prevents any accidents due to temperature probe failure, ensuring safety.

Comprehensive AMC and spare parts stock

Once the standard warranty is over comprehensive AMC’s are available at nominal rates, avoiding high ownership costs and ensuring trouble free operations for years to come. All spares parts are in stock at regional offices.

 

 

 

 

Tempreture display

 

 300DIG

 300DIG1 

 

 

 300DIG2  

 

 

 

 

 

 

  

300DIG3

 300DIG4  

 

 

  

 

300DIG5

UNDERCOUNTER – 300DIG

Dimensions - 640 x 750 x 850 cm

 

Capacity(Racks/ Hr.) 60
Capacity Plates /Hr 1080
Wash programs 2
Temprature Display N/A
Controls ELECTRONIC
Display Type LED
Electrical Load (KW) 4.75
Power Supply 230
Tank Capacity (Litres) 25
Temperature Interlock NO
Phase Monitor NO
Length of Machine 620
Prewash Zone N/A
Wash Zone YES
Rinse Zone YES
Dry Zone N/A
Prewash Power N/A
Wash Power 0.75
Net Weight 80
Rack Dimensions (mm) 500 X 500
Clear Entry Height (mm) 320
Wash Temperature 62
Rinse Temperature 82
Rinse Water (Litres/Rack) 2.3

 

 

UNDERCOUNTER – 300DIG

Product Description

Deep drawn wash tank for easy cleaning and hygiene

The wash tank is made of AISI 304 grade deep drawn (die pressed) stainless steel, which eliminates any welded joints and problems arising from that. Deep drawn wash tank with round corners facilitates easy cleaning. Easily removable basket support, wash and rinse arms, filters etc. For easy cleaning. Unique air break prevents back flow contaminations to the piping network. 

High quality components

Indigenously designed and developed parts for perfect results after each wash. Care has been taken to ensure that the components perform under indian working conditions

Auto cycle

The machine cycle automatically starts on the closing of door when set into auto mode. If the machine is not up to temperature, it will auto cycle as soon as correct temperature has been reached. No buttons to push. Leaves operator time to perform other tasks

High temperature wash and rinse

Washing is done at a temperature of 60°c with detergent water; this ensures 100% cleaning of oil residues. Final rinse using fresh water removes any detergent residues on the plate. It is performed at 82°c + to kill all germs, ensuring haccp compliance. Specially designed spray nozzles ensures minimum evaporation of sprayed water and maximum contact with wares being washed.

Multiple wash programs

Option of 5 wash programs for saving time, water and chemicals. The operator can select the best suitable wash programs to suit washing needs along with continuous cycle recommended for soaking of heavily soiled dishes.

Filtration system

The filter filters out smaller particles before they enter the wash pump, giving superior wash results and reducing service requirements.

Solid state control

This technology gives improved reliability and machine flexibility, and will keep the operator informed at all stages of machine operation. Accurate chemical dosing and temperature control will ensure a first class result each time.

Strong washing power

Powerful wash pump and injection moulded scientifically set intelligent collision technology ensures maximum washing power. Unique cross blade action from top and bottom ensures that no area remains uncovered.

Safety

12 volt dc control circuit ensures operator safety from electric shocks. Temperature interlock ensures machine will not operate until the correct work temperature has been reached, giving superior results and a sanitized end product.

Dry run protection

Heater / pump will not operate if water levels are inadequate preventing burnouts

Washing and rinsing temperature indicators

Separate digital temperature gauges showing live temperatures guarantee perfect results

Door safety sensor

Automatically stops the cycle should the door be opened during the cycle. This avoids accidental spillage and gives safety to the operator

Increased profits

Designed to give you huge savings in labour, detergents and water. The machine saves upto 70% water and detergents and 90% labour. The machine minimizes chipping and scratching of plates, increasing the life of expensive crockery. Space requirements are much less when compared to normal 3 sink washing system.

Zero back clearance

The machine requires no space at the rear side, this gives flexibility of installation and space savings. All service points are at the bottom side of rear panel, simple to install and maintain.

Safety thermostat

Additional safety thermostat set at 90 degree c prevents any accidents due to temperature probe failure, ensuring safety.

Comprehensive AMC and spare parts stock

Once the standard warranty is over comprehensive AMC’s are available at nominal rates, avoiding high ownership costs and ensuring trouble free operations for years to come. All spares parts are in stock at regional offices.

 

 

 

 300DIG

 300DIG1 

 

 

 300DIG2  

 

 

 

 

 

 

  

300DIG3

 300DIG4  

 

 

  

 

300DIG5

UNDERCOUNTER – 300DIG 

Dimensions - 465 x 570 x 730 cm

 

 

Capacity(Racks/ Hr.) 60
Capacity Plates /Hr 1080
Wash programs 5
Temprature Display YES
Controls DIGITAL ELECTRONIC
Display Type DIGITAL
Electrical Load (KW) 4.75
Power Supply 230
Tank Capacity (Litres) 25
Temperature Interlock NO
Phase Monitor NO
Length of Machine 620
Prewash Zone N/A
Wash Zone YES
Rinse Zone YES
Dry Zone N/A
Prewash Power N/A
Wash Power 0.75
Net Weight 80
Rack Dimensions (mm) 500 X 500
Clear Entry Height (mm) 320
Wash Temperature 62
Rinse Temperature 82
Rinse Water (Litres/Rack) 2.3

 

 

UNDERCOUNTER – 400DIG

Product Description

Deep drawn wash tank for easy cleaning and hygiene

The wash tank is made of AISI 304 grade deep drawn (die pressed) stainless steel, which eliminates any welded joints and problems arising from that. Deep drawn wash tank with round corners facilitates easy cleaning. Easily removable basket support, wash and rinse arms, filters etc. For easy cleaning. Unique air break prevents back flow contaminations to the piping network. 

High quality components

Indigenously designed and developed parts for perfect results after each wash. Care has been taken to ensure that the components perform under indian working conditions

Auto cycle

The machine cycle automatically starts on the closing of door when set into auto mode. If the machine is not up to temperature, it will auto cycle as soon as correct temperature has been reached. No buttons to push. Leaves operator time to perform other tasks

High temperature wash and rinse

Washing is done at a temperature of 60°c with detergent water; this ensures 100% cleaning of oil residues. Final rinse using fresh water removes any detergent residues on the plate. It is performed at 82°c + to kill all germs, ensuring haccp compliance. Specially designed spray nozzles ensures minimum evaporation of sprayed water and maximum contact with wares being washed.

Multiple wash programs

Option of 5 wash programs for saving time, water and chemicals. The operator can select the best suitable wash programs to suit washing needs along with continuous cycle recommended for soaking of heavily soiled dishes.

Filtration system

The filter filters out smaller particles before they enter the wash pump, giving superior wash results and reducing service requirements.

Solid state control

This technology gives improved reliability and machine flexibility, and will keep the operator informed at all stages of machine operation. Accurate chemical dosing and temperature control will ensure a first class result each time.

Strong washing power

Powerful wash pump and injection moulded scientifically set intelligent collision technology ensures maximum washing power. Unique cross blade action from top and bottom ensures that no area remains uncovered.

Safety

12 volt dc control circuit ensures operator safety from electric shocks. Temperature interlock ensures machine will not operate until the correct work temperature has been reached, giving superior results and a sanitized end product.

Dry run protection

Heater / pump will not operate if water levels are inadequate preventing burnouts

Washing and rinsing temperature indicators

Separate digital temperature gauges showing live temperatures guarantee perfect results

Door safety sensor

Automatically stops the cycle should the door be opened during the cycle. This avoids accidental spillage and gives safety to the operator

Increased profits

Designed to give you huge savings in labour, detergents and water. The machine saves upto 70% water and detergents and 90% labour. The machine minimizes chipping and scratching of plates, increasing the life of expensive crockery. Space requirements are much less when compared to normal 3 sink washing system.

Zero back clearance

The machine requires no space at the rear side, this gives flexibility of installation and space savings. All service points are at the bottom side of rear panel, simple to install and maintain.

Safety thermostat

Additional safety thermostat set at 90 degree c prevents any accidents due to temperature probe failure, ensuring safety.

Comprehensive AMC and spare parts stock

Once the standard warranty is over comprehensive AMC’s are available at nominal rates, avoiding high ownership costs and ensuring trouble free operations for years to come. All spares parts are in stock at regional offices.

 

 

 

 300DIG

 300DIG1 

 

 

 300DIG2  

 

 

 

 

 

 

  

300DIG3

 300DIG4  

 

 

  

 

300DIG5

UNDERCOUNTER – 300DIG 

Dimensions - 465 x 570 x 730 cm

 

 

Capacity(Racks/ Hr.) 60
Capacity Plates /Hr 1080
Wash programs 5
Temprature Display YES
Controls DIGITAL ELECTRONIC
Display Type DIGITAL
Electrical Load (KW) 6.75
Power Supply 410
Tank Capacity (Litres) 25
Temperature Interlock YES
Phase Monitor NO
Length of Machine 620
Prewash Zone N/A
Wash Zone YES
Rinse Zone YES
Dry Zone N/A
Prewash Power N/A
Wash Power 0.75
Net Weight 80
Rack Dimensions (mm) 500 X 500
Clear Entry Height (mm) 320
Wash Temperature 62
Rinse Temperature 82
Rinse Water (Litres/Rack) 3

 

 

UNDERCOUNTER – 400ECO

Product Description

Deep drawn wash tank for easy cleaning and hygiene

The wash tank is made of AISI 304 grade deep drawn (die pressed) stainless steel, which eliminates any welded joints and problems arising from that. Deep drawn wash tank with round corners facilitates easy cleaning. Easily removable basket support, wash and rinse arms, filters etc. For easy cleaning. Unique air break prevents back flow contaminations to the piping network. 

High quality components

Indigenously designed and developed parts for perfect results after each wash. Care has been taken to ensure that the components perform under indian working conditions

Auto cycle

The machine cycle automatically starts on the closing of door when set into auto mode. If the machine is not up to temperature, it will auto cycle as soon as correct temperature has been reached. No buttons to push. Leaves operator time to perform other tasks

High temperature wash and rinse

Washing is done at a temperature of 60°c with detergent water; this ensures 100% cleaning of oil residues. Final rinse using fresh water removes any detergent residues on the plate. It is performed at 82°c + to kill all germs, ensuring haccp compliance. Specially designed spray nozzles ensures minimum evaporation of sprayed water and maximum contact with wares being washed.

Multiple wash programs

Option of 5 wash programs for saving time, water and chemicals. The operator can select the best suitable wash programs to suit washing needs along with continuous cycle recommended for soaking of heavily soiled dishes.

Filtration system

The filter filters out smaller particles before they enter the wash pump, giving superior wash results and reducing service requirements.

Solid state control

This technology gives improved reliability and machine flexibility, and will keep the operator informed at all stages of machine operation. Accurate chemical dosing and temperature control will ensure a first class result each time.

Strong washing power

Powerful wash pump and injection moulded scientifically set intelligent collision technology ensures maximum washing power. Unique cross blade action from top and bottom ensures that no area remains uncovered.

Safety

12 volt dc control circuit ensures operator safety from electric shocks. Temperature interlock ensures machine will not operate until the correct work temperature has been reached, giving superior results and a sanitized end product.

Dry run protection

Heater / pump will not operate if water levels are inadequate preventing burnouts

Washing and rinsing temperature indicators

Separate digital temperature gauges showing live temperatures guarantee perfect results

All stainless steel construction 

AISI 304 ss (food grade) construction for long life.

Door safety sensor

Automatically stops the cycle should the door be opened during the cycle. This avoids accidental spillage and gives safety to the operator

Increased profits

Designed to give you huge savings in labour, detergents and water. The machine saves upto 70% water and detergents and 90% labour. The machine minimizes chipping and scratching of plates, increasing the life of expensive crockery. Space requirements are much less when compared to normal 3 sink washing system.

Zero back clearance

The machine requires no space at the rear side, this gives flexibility of installation and space savings. All service points are at the bottom side of rear panel, simple to install and maintain.

Safety thermostat

Additional safety thermostat set at 90 degree c prevents any accidents due to temperature probe failure, ensuring safety.

Comprehensive AMC and spare parts stock

Once the standard warranty is over comprehensive AMC’s are available at nominal rates, avoiding high ownership costs and ensuring trouble free operations for years to come. All spares parts are in stock at regional offices.

 

 

 

 300DIG

 300DIG1 

 

 

 300DIG2  

 

 

 

 

 

 

  

300DIG3

 300DIG4  

 

 

  

 

300DIG5

300eco-400eco-uc

Dimensions - 640 x 750 x 850 cm

 

Capacity(Racks/ Hr.) 60
Capacity Plates /Hr 1080
Wash programs 2
Temprature Display N/A
Controls ELECTRONIC
Display Type LED
Electrical Load (KW) 6.75
Power Supply 410
Tank Capacity (Litres) 25
Temperature Interlock NO
Phase Monitor NO
Length of Machine 620
Prewash Zone N/A
Wash Zone YES
Rinse Zone YES
Dry Zone N/A
Prewash Power N/A
Wash Power 0.75
Net Weight 80
Rack Dimensions (mm) 500 X 500
Clear Entry Height (mm) 320
Wash Temperature 62
Rinse Temperature 82
Rinse Water (Litres/Rack) 3

 

 

UNDERCOUNTER – 400ELE

Product Description

Washing and rinsing temperature indicators 

Separate analogue temperature gauges showing live temperatures guarantee perfect results

Deep drawn wash tank for easy cleaning and hygiene

The wash tank is made of AISI 304 grade deep drawn (die pressed) stainless steel, which eliminates any welded joints and problems arising from that. Deep drawn wash tank with round corners facilitates easy cleaning. Easily removable basket support, wash and rinse arms, filters etc. For easy cleaning. Unique air break prevents back flow contaminations to the piping network. 

High quality components

Indigenously designed and developed parts for perfect results after each wash. Care has been taken to ensure that the components perform under indian working conditions

Auto cycle

The machine cycle automatically starts on the closing of door when set into auto mode. If the machine is not up to temperature, it will auto cycle as soon as correct temperature has been reached. No buttons to push. Leaves operator time to perform other tasks

High temperature wash and rinse

Washing is done at a temperature of 60°c with detergent water; this ensures 100% cleaning of oil residues. Final rinse using fresh water removes any detergent residues on the plate. It is performed at 82°c + to kill all germs, ensuring haccp compliance. Specially designed spray nozzles ensures minimum evaporation of sprayed water and maximum contact with wares being washed.

Multiple wash programs

Option of 5 wash programs for saving time, water and chemicals. The operator can select the best suitable wash programs to suit washing needs along with continuous cycle recommended for soaking of heavily soiled dishes.

Filtration system

The filter filters out smaller particles before they enter the wash pump, giving superior wash results and reducing service requirements.

Solid state control

This technology gives improved reliability and machine flexibility, and will keep the operator informed at all stages of machine operation. Accurate chemical dosing and temperature control will ensure a first class result each time.

Strong washing power

Powerful wash pump and injection moulded scientifically set intelligent collision technology ensures maximum washing power. Unique cross blade action from top and bottom ensures that no area remains uncovered.

Safety

12 volt dc control circuit ensures operator safety from electric shocks. Temperature interlock ensures machine will not operate until the correct work temperature has been reached, giving superior results and a sanitized end product.

Dry run protection

Heater / pump will not operate if water levels are inadequate preventing burnouts

Washing and rinsing temperature indicators

Separate digital temperature gauges showing live temperatures guarantee perfect results

All stainless steel construction 

AISI 304 ss (food grade) construction for long life.

Door safety sensor

Automatically stops the cycle should the door be opened during the cycle. This avoids accidental spillage and gives safety to the operator

Increased profits

Designed to give you huge savings in labour, detergents and water. The machine saves upto 70% water and detergents and 90% labour. The machine minimizes chipping and scratching of plates, increasing the life of expensive crockery. Space requirements are much less when compared to normal 3 sink washing system.

Zero back clearance

The machine requires no space at the rear side, this gives flexibility of installation and space savings. All service points are at the bottom side of rear panel, simple to install and maintain.

Safety thermostat

Additional safety thermostat set at 90 degree c prevents any accidents due to temperature probe failure, ensuring safety.

Comprehensive AMC and spare parts stock

Once the standard warranty is over comprehensive AMC’s are available at nominal rates, avoiding high ownership costs and ensuring trouble free operations for years to come. All spares parts are in stock at regional offices.

 

 

 

 

Tempreture display

 

 300DIG

 300DIG1 

 

 

 300DIG2  

 

 

 

 

 

 

  

300DIG3

 300DIG4  

 

 

  

 

300DIG5

300ele-400ele-uc

Dimensions - 640 x 750 x 850 cm

 

Capacity(Racks/ Hr.) 60
Capacity Plates /Hr 1080
Wash programs 2
Temprature Display YES
Controls ELECTRONIC
Display Type ANALOG/LED
Electrical Load (KW) 4.75
Power Supply 410
Tank Capacity (Litres) 25
Temperature Interlock YES
Phase Monitor NO
Length of Machine 620
Prewash Zone N/A
Wash Zone YES
Rinse Zone YES
Dry Zone N/A
Prewash Power N/A
Wash Power 0.75
Net Weight 80
Rack Dimensions (mm) 500 X 500
Clear Entry Height (mm) 320
Wash Temperature 62
Rinse Temperature 82
Rinse Water (Litres/Rack) 3